A) Different type  films                                                                                                                                           

1.Aluminum metalized polypropylene film.
2.Aluminum-Zinc alloy metalized polypropylene film.
3.Aluminum-Zinc alloy metalized polypropylene film with heavy edge.

4.Aluminum metalized polyester film.
5.Aluminum-Zinc alloy metalized polyester film.
6.Aluminum-Zinc alloy metalized polyester film with heavy edge.

Core

Material:Plastic 

Width:Film Slit Width +/-0.2mm

Inner Diameter:75mm+1.0mm/-0.5mm

Roll Outer Diameter 

For slit widths 4.0mm up:155+6/-15mm 

For slit widths 10.0mm up:180+8/-18mm

For slit widths 25.0mm up:240+10/-20mm 

For slit widths 50.0mm up:320+10/-40mm

ROLL

Film is wound on solid cores,with the metallized layer inside. 

Rolls are wound up to the specific outer diameter.

The loose end of film is held in place by a closing sticker. 

Rolls are always packed in pairs. 

There is a plastic foam between te rolls to protect the electrode side.

C) Package                                                                                                                                                                  

1.The piled rolls are packed in plastic bad abd heat-sealed with esiccants after vacuum  removals

2.Labels inside the bages mark film class,type,thickness,width,free margin width and resistance.

3.The bags are packed in carton cases.

4.The carton cases are packed in wooden cases or reinforced carton.

D) Storage                                                                                                                                                                   

1.Metalized film should be stored in its original packing until use.The temperature should be  controlled to 5-35 oC and humidity less than 85%  RH

2.On exposure to moisture,the thin metalized layer is likely to be easily oxidized.Therefore,after the packing is opened,the rolls should be used as soon as possible.

3.It is recommended that the opened rolls be stored in temperature conditions of 15-25 oC 

4.Metalized film kept sealed in the original packing and stored as described above is guaranteed according to the following conditions

5.Al metalized film:12 months from the delivered date 

6.Al/Zn Alloy metalized film:As Zn is relatively unstable,preservation period depends on the resistance of the film 

7.10 Ohms or less 6 months(from delivery date)

8.10 to 15 Ohms 3 months(from delivery date)

9.15Ohms 1months(from delivery date)

Anniel (at)anhuisafe dot com